Fitrix Permanent Licensing

Warning, your Fitrix software will only operate for 30 days from the time of initial installation if you have not installed your permanent installation keys.

The Fitrix Installation that you have completed by now sets a temporary 30 day license. In order to complete the permanent licensing of the product, you will need to obtain and install permanent ‘installation keys’ from Fourth Generation Software.

Please be aware that there are 4 different products that must be permanently licensed:

a. Fitrix run-time

b. VDT development

c. Four J’s development

d. Four J’s run-time

For each of the 4 products to be licensed, there is a 3 step process:

Step 1: Obtain your temporary installation keys (during installation) and email these to Fourth Generation Software

Step 2: Receive your permanent installation keys from Fourth Generation Software by email

Step 3: Install your permanent installation keys

Step 1: Obtain your installation keys and email these to Fourth Generation Software

Note, you will be asked to send a single email with:

a. Fitrix temporary license codes

b. VDT temporary license codes

c. Four J’s temporary development license codes

d. Four J’s temporary runtime license codes

Recommendation: During these steps, you will be asked to copy and paste information between your Linux host session and your email session. If your email software is available from your Linux host, you can access both sessions from your Linux graphical screen. If your email software is available from your Windows PC, you should access your Linux system from your Windows PC as follows: Click on Start, click on Run, key in: telnet <put the name or ip address of your Linux host here>. This will allow you to access both sessions on the same workstation so that you can copy and paste between them.

A – Send an email with your temporary license to obtain your permanent licenses:

During the Fitrix installation you were instructed to copy and paste your Fitrix temporary licenses into an email and address this to ‘licensemaster@fitrix.com’.

If you forgot to do this, you can still recover the codes by following the instructions below.

At the ‘$’ prompt, key in:

/fitrix/bin/fx_resend_license.sh <return>

Highlight the text between the dashed lines with your cursor and copy

it to the clipboard. Then paste it into the body of an email with--

Subject: Temporary license: <company name>

To: licensemaster@fourthgeneration.com

------------------------------------------------------------------

# Temporary license from: Wray's Pizza

: xxxr8JVTY J3gxxxdaKviK FITRIX

# Temporary license from: Wray's Pizza

: xxx3tsNgi mTvxxxyLC2DP VDT

# Temporary FourJs dev license

License number....................:TAB#AAF00XXX

License number KEY................:E66E2T5VDXXX

Installation number...............:D95ANPRAFXXX

# Temporary FourJs rt license

License number....................:TAB#CAB00XXX

License number KEY................:U8KAL3VTPXXX

Installation number...............:T9LAE00ABXXX

------------------------------------------------------------------

Send the email as directed, if your email is not accessible to copy and paste, you will need to print the codes and type them into an email exactly as they appear.

If you purchased the Fitrix Quick Start version, FourJ’s development licenses will show not show.

If you have development only version, FourJ’s run-time licenses will not show.

Step 2: Receive your permanent installation keys from Fourth Generation Software by email

Within 5 business days after you send all of your codes to us by email, you will receive an email from Fourth Generation with your permanent installation codes similar to the following:

Subject: Permanent license to: <your company name>

To: <your email address>

-----------------------------------------------------------------

This email contains the permanent license codes required to complete the permanent licensing of your Fitrix software. Please refer to the ‘Fitrix Permanent Licensing’ instructions included with your Fitrix CD under installation instructions.

If you need assistance, please contact us by email at support@fitrix.com or call 1-800-374-6157 or 404-432-7623 and ask for Fitrix support

# Here is your Fitrix license installation number key:

: xxxYJzQvenje gTSmm74sHk85XXX FITRIX

#End.

# Here is your VDT license installation number key:

: xxxFGEQvenje fT2mm74sHk85XXX VDT

#End.

# Here is your FourJ’s Development installation number key:

XXXVSUXDJR61

# Here is your FourJ’s Runtime installation number key:

XXXTEG3DKVIV

Step 3: Install your permanent installation keys

Log on to your Linux host system with the ‘root’ username and password

A – The Fitrix Licenses (FITRIX/VDT).

At the ‘$’ prompt, key in:

. /fitrix/bin/start_dev.sh; fg_licen

(note: don’t forget the ‘. ‘ at the start of the command)

Select option - 2. Permanent licensing

Copy and paste the 'FITRIX' license line from the return email:

(in the example)

: xxxYJzQvenje gTSmm74sHk85XXX FITRIX

Then key in: <enter>

exit <enter>

(note: you must type the word ‘exit’ and then press the <enter> key to compete this step)

make sure it displays ‘Licensing successful’

exit back to the “$” prompt

Select option - 2. Permanent licensing again

Copy and paste the 'VDT' license line from the return email:

(in the example)

: xxxFGEQvenje fT2mm74sHk85XXX VDT

Then key in: <enter>

exit <enter>

B – The Four J’s Licenses (Development/Runtime)

Development license:

At the ‘$’ prompt, key in: . /fitrix/bin/start_dev.sh; fglWrt -k <code from email>

(in the example)

. /fitrix/bin/start_dev.sh; fglWrt -k XXXVSUXDJR61

Runtime license:

At the ‘$’ prompt, key in: . /fitrix/bin/start_prod.sh; fglWrt -k <code from email>

(in the example)

. /fitrix/bin/start_prod.sh; fglWrt -k XXXTEG3DKVIV